Flame 8000 - AC Electric
Launched in 2012 the Flame 8000 incinerating toilet is simple and safe to use. The design provides comfort and reliability that is required in a family home. Incinerating toilets – user guide:
- Place bowl liner before each visit
- Push the handle and the bag slides in to the burning chamber
- 45 min program for solids 550 deg
- 10 min program evaporates urine 550 deg
- Fan Program, to expel shower condensation
- Capacity 6 people and emptying the ash box each week
- 3 people can use the toilet after each other, then allow 30 min for the next user
- Toilet can be used during incinerating cycle
- Everyone should sit when using the Flame
- Often used in conjunction with Unisex waterless urinals
- 28kgs
- Energy use is 0.4kw – 1.3kw per visit (1KwH = €0.16 roughly)
- 3 Year guarantee
The internal fan will quietly and effectively removes odors and moisture from the toilet and bathroom. Ventilation duct run straight through an exterior wall.
Flame 8000 has no requirement for room temperature, but works in both cold and warm space. It can be placed as desired and need not be attached to the wall or floor.
The built-in controller makes it possible to use two different programs, thereby enabling an energy efficient combustion of the waste.
Flame 8000 comes with child seat, 500 bowl liners and the Cowl.
The ash that is removed is safe to use in the garden.
| Material | Upper Polystyrene, Vanity White lacquered galvanized sheet, inner stainless steel |
| Material | Seat High Gloss Polypropylene, Ash tray Stainless steel |
| Heating Element | 240v, 1.6 kW |
| Energy | 0.4 to 1.3 kW / Visit |
| Electrical | Cable 2.4 m, grounded plug |
| Ash box size | 3.3litre |
Separett Flame incinerating toilet has no requirement for room temperature, but works in both cold and warm space. It can be placed as desired and need not be attached to the wall or floor.
Venting can be done through a wall or ceiling with a maximum of 6 meters pipes 110mm diameter and 1st 90 and 2x 45 bends.
Should Separett Flame used during the winter so it is recommended to insulate the pipe to its full length.
Incoming air is by 160mm valve through the outer wall either down at Separett Flame or up at the ceiling.
Roof Flashing
Contains 1pc*75mm hose clamp together with 1pc*110mm. For tarred or tiled roof. Made of EPDM-rubber. Used to a tighten installation …...Read More...
Cowl
Used at the end of the Flame 8000 vent outlet Metal Diameter Ø110 mm Included with the unit as standard ...Read More...
Air Inlet
Used to bring fresh air to the toilet room when using the Separett FLAME. The cover is openable by pulling the …...Read More...